Loading... Please wait...


Our Newsletter

BIA-INOX120PC Surface Mounted Jet Pump

  • Image 1
Free Shipping
Shipping Zones

Product Description

The pump is a self-priming pressure system pump supplied wired and ready to install.     ON SALE TILL END FEB15

The self-priming ability provides excellent suction capacity.

Used especially for supplying water to domestic installations.

The pump is characterised by: 

  • Automatic electronic pump control fitted and wired. 
  • Automatic electronic control provides run dry protection and constant pressure at low flows.
  • Automatic electronic control has in-built check valve. 
  • Corrosion resistant pump body, diffuser and impeller. 
  • Mechanical shaft seal. 
  • 240V single phase TEFC motor with in-built auto reset thermal overload.

Clean water temperature range: 2 – 35 deg C

Pump body: Stainless Steel
Diffuser, Impeller: Technopolymer 
Mechanical seal: Carbon/Ceramic/Nitrile
O rings: Nitrile

Maximum ambient temperature: 40 deg C
Maximum operating pressure 6 bar
Pipe connections suction/discharge: 1” BSP F / 1” BSP M

Electrical data:
Rated voltage: 240V
Mains frequency: 50 Hz
Current: 3.5amps
Capacitor: 20 uF 
Motor duty: Continuous
Motor type: Asynchronous, TEFC
Motor protection: In-built thermal overload
Ingress protection: IP 54
Insulation class: F
Power cable length: 1.2 m

Net weight: 9.8 kg 

Dimensions: 365mm Long x 420mm High x 225mm Wide

2 Year Bianco Pumpz Warranty


Other Details

Output kW:
Maximum Flow:
50 Litres per minute
Number of Taps:
5 to 6 taps
Head Height:
Up to 43 metres
Nominal Pressure:
120kPa 17psi

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!