VERSATILE LEAF AND DEBRIS CATCHER

The Leaf Catcha™ is a versatile rain head that can either be used to:

• catch debris
• provide a "catchment device" for directing tank overflow water to stormwater pipes.

The Leaf Catcha™ is a great value product including a horizontal internal stainless steel screen that keeps mosquitoes out.

Features and Benefits

• New modern streamline aesthetics
• Great value “bucket style” Rain Head
• Ideal rainwater tank overflow catchment product
• Includes a horizontal internal stainless steel screen:
  - A single mosquito proof stainless steel mesh screen with 0.955mm aperture is fitted with a secure “locking system”
  - Easy to remove for maintenance
• High flow rate performance
• Superior catchment efficiency at low and high flow rates

Installation Instructions

GUTTER MOUNTING

1. Cut the downpipe off 70mm from the underside of the gutter.
2. Refitt the downpipe to allow 240mm from the underside of the gutter to the top edge of the downpipe.
3. Fit and bracket the pipe to the wall.

Fitting the Leaf Catcha

1. Place the mesh screen in the Leaf Catcha, snapping the screen under the rear retaining ledge first, then the front and sides.
2. To place the Leaf Catcha into position, slightly rotate it, slip it under the upper section of downpipe, slide into line and push the unit down onto the lower section of downpipe.

 WALL MOUNTING

• Cut 170mm section out of the downpipe in the desired position ensuring that the outlet of the Leaf Catcha is a minimum of 500mm above the inlet to the water storage tank.

Fitting the Leaf Catcha

• Place the mesh screen in the Leaf Catcha, snapping the screen under the rear retaining ledge first, then the front and sides.
• To place the Leaf Catcha into position, slightly rotate it, slip it under the upper section of downpipe, slide into line and push the unit down onto the lower section of downpipe.

View a fact sheet on the Leaf Catcha Orignal